AWM PASTURE MANAGEMENT
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
- Frame – Three standard width configurations are available: 6.25 ft., 7.5 ft. and 10 ft. The frame of the AerWay is a structural steel weldment with integral weight trays. The AerWay is available as either a 3-Point (AWM3) or a Pull Type (AWMP) configuration.
- Rollers – The rollers use four tines per row at 7.5” spacing. Each roller shaft is supported by two 50mm (2”) Pillow Block bearings.
- Tillage – Rollers can be adjusted to 0°, 2.5° and 5° settings to vary the extent of aeration or cultivation.
- AWMP Hydraulics – 3” bore x 12” stroke double acting cylinder with manual lockout.
- AWMP Wheels – 9.5” X 15” – 8 ply ribbed agricultural tire mounted to six bolt hub. Quantity: Two supplied.
Benefits:
- Great Value, Saves Resources – One implement that can do many jobs. Get the maximum benefit out of your inputs and achieve a better root system that results in higher yields.
- Use All Season – Aerate, warm, and loosen soils in the spring, then relieve compaction or renovate after each hay cutting during the rest of the season.
- Very Dependable – Designed and built to withstand demanding field conditions and provide years of reliable service.
- Increased Yields – Better quality grass or hay results in more weight gain and healthier animals.
AERWAY FRAME SPECIFICATIONS | |
AWM SERIES SPECIFICATIONS (Three Point Models / Manual Adjust) | |
Model Number | AWM3-063-AG-4 |
Cultivation Width | 6.25' |
Travel Width | 6.75' (81") |
# of Tines | 40 |
Weight | 1200 lbs |
HP Required | 38-63 |