Herbicide, Insecticides & Inoculants
PRINT 
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Get all the benefits from in-furrow applied granular inoculant
Inoculant Applicator
Injects inoculant into air seeder towers for precise placement in seed furrows.
Modified hopper shaft provides agitation to reduce bridging in the hopper.
Comes with eight tower injectors.
Injectors do not affect tower performance for seed or fertilizer.
Individually metered outlets allow matching the numbers of air seed towers.
1665 Individual Metering Applicators
Individual Outlet Positive Displacement Applicator
Apply insecticides, herbicides, small seeds, inoculants, or micro-nutrients precisely where needed and at the rate required. Valmar’s ground drive metering assures precise application regardless of varying ground speed. The roller chain is driven, 60-speed mechanical gearbox delivers an accurate application in five percent increments, or you can use the optional hydraulic drive for V.R.T. application. With Valmar’s individual metering, matching the number of outlets required for your operation is easily accomplished by opening or closing individual slide gates.
Hopper:
- 33 cu. ft.
- Mild steel with two-component epoxy primer and two-component, cross-linked acrylic top coat paint system
- Weather tight lid
- Product-level sight gauge
- Agitator to reduce product bridging
- Manifold pressure gauge
Product Delivery:
- 1.25-inch ID flexible PVC hose
- 8 air seeder tower injectors
Metering:
- Stainless steel metering bottom
- 16 individual metering outlets can be shut off independently to match the number of air seeder towers
- Optional Valmar ground drive, hydraulic drive, or utilize some components of air seeder drive
Fan:
- Requires a fan drive
- 18-inch impeller with three-inch outlet
- Operates at 3200-4000 RPM
Options:
- Metering drive is a required option
- Mechanical ground drive includes 60-speed gearbox with five percent between settings, ground drive tire, and hand crank for calibration
- Hydraulic metering drive includes an 11.3 CID hydraulic motor that requires up to 12 GPM for complete operating range
- JD 1900 Commodity Cart ground drive takeoff includes 60-speed gearbox and necessary material
- A fan drive is a required option when using the Valmar fan
- Hydraulic: 2.2 CID motor requires 8 GPM – does not include hydraulic lines
- Gas: 9 HP engine
- 16-outlet broadcast deflector kit
- Electric clutch and control kit
- JD 1900 tow behind cart mounting kit
- Seeding tool hitch mount kit
Shipping Information:
- Height: 45 in.
- Width: 65.5 in. (40 in. without fan and platform)
- Length: 36 in.
- Weight: 740 lb.
Hopper:
- 33 cu. ft.
- Mild steel with two-component epoxy primer and two-component, cross-linked acrylic top coat paint system
- Weather tight lid
- Product level sight gauge
- Agitator to reduce product bridging
- Manifold pressure gauge
Product Delivery:
- 1.25-inch ID flexible PVC hose
- 8 air seeder tower injectors
Metering:
- Stainless steel metering bottom
- 16 individual metering outlets can be shut off independently to match the number of air seeder towers
- Optional Valmar ground drive, hydraulic drive, or utilize some components of air seeder drive