Application Equipment
PRINT 
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
- 120 foot application width saves time and fuel costs through fewer passes
- Meets controlled traffic farming standards (120 foot/36 meter-wide pattern)
- 12 Section, automatic, spread pattern adjustment / swath control to reduce over application and minimize spreading into environmentally sensitive areas
- High clearance adjustable axle (90-120 inches) allowing for in season application
- Largest capacity of any single-axle top-dress spreader on the market
- Self contained, continuous-duty hydraulics platform for maximum tractor compatibility
- 3 independent, automatically adjusted, application control systems give optimum response time to prescription controls
| HOPPER |
| - Capacity: 282 cubic feet / Ton: 9.2 |
| - Painted, 409 stainless steel |
| - Working Width Fertilizer up to 120 feet |
| - ISOBUS Compatible 12 section spread pattern control |
| - Roll tarp installed |
| - Secondary hopper split and 60 cubic foot secondary metering drive is optional |
| - Fill screens with access doors to hopper(s) |
| - Hopper screen/filter |
| DRIVE |
| - PTO Driven Self Contained Hydraulic system: |
| - Choice: 1000 RPM Series 6 CV 1 3/4 20 Spline |
| - 1000 RPM Series 6 CV 1 3/8 21 Spline |
| - Includes: 4 Manifolds and PWM Valves to control each spinner and each conveyor. Heat shrink fittings. |
| CONVEYER CHAIN |
| - Twin 12 inch, 304 stainless steel mesh conveyor chains |
| - Maximum rates 1000 lbs/acre at 8 mph |
| SPINNERS |
| - Standard: Twin Independently Driven Stainless Steel Spinners |
| TIRE & SUSPENSION |
| - Standard: Single Axle High Clearance Frame with 90 in. to 120. Adjustable Axle (Adjustable in 6 in. Increments.) |
| - Standard: 90 in. to 120 in. Adjustable Axle w/380/90 R46 Tires |
| - Optional: 80 in. to 110 in. Adjustable Axle w/380/90 R46 |
| Optional: 800/65 R32 Tires |
| LIGHT PACKAGE |
| - Standard: Rear Tail Lights with Turn Signal, Side Markers, Wired with Corrosion Resistant Wiring Kit |
| Optional Hydraulic Fan Drive |
| - Requires 21 GPM operating at 2500 PSI |
| - 3/4 inch hydraulic lines |
| - 1/2 inch couplers and 3/4 inch high flow couplers included |
| - Case drain required |
| TARP OPTIONS |
| - Standard: None |
| - Optional: Vinyl Cable Lock Tarp |
| SCALES |
| -Standard: 8 Digi-Star Load Cells - Traditional weight readings to assess payload. The ECU's Dynamic Metering and Angle Compensation functionalities are continuously monitoring scale feedback to ensure high levels of accuracy during application |
| PROVEN SPLIT CHAIN ISOBUS ECU |
| - Hydraulic valve control for dual belt/chain, dual spinner spreader. |
| - Linear actuator control of left and right side drop-points. |
| - Static or Dynamic weighing system including Angle Compensation |
| - Automatic Section Control for 2 or 12 sections. |
| - Monitor Compatibility: JD 2630, JD 4640, Trimble TMX 2050, Trimble FM 1000 / FMX, Pro 700 |
| - Contact Salford BBI regarding other monitor compatibility |