Maple Valley Implement Inc Haytools & Spreaders
PRINT 
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
BIGGER AND BETTER WINDROWS, FASTER THAN EVER
The H5980 heavy-duty wheel rake keeps pace with even the highest volume hay growers. Superior design and construction, including offset wheels, hydraulic windrow width adjustment and patented mechanical rake beams, make short work of broad flatland raking, and let you get the best windrows out of every crop.
|
Frame/raking wheel beam pitch |
Ratchet jack at rear of center tongue |
|
Raking wheel angle from vertical |
Beam pitch adjustment from 0 to 10 degrees outboard at top w/stop bolts |
|
Raking wheel ground pressure |
Individual at each wheel and gang adjustment at the rear of each lifting pipe |
|
Transport locks |
Mechanical locks of rake beam angle and wheel raise/lower |
|
Tractor-mounted control box |
– Electro-hydraulic control of individual LH/RH wing angle – Electro-hydraulic control of individual LH/RH frame width – Electro-hydraulic control of individual LH/RH or combined wheel raise lower |
| Dimensions | |
|
Transport width, ft. in. (m) |
12’ 3” (3.7) |
|
Transport length, ft. in. (m) |
28’ 3” (8.6) |
|
Overall height, in. (mm) |
90 (2286) |
|
Maximum raking width, ft. in. (m) |
30’ 3” (9.2) |
|
Maximum windrow width, in. (mm) |
72 (1829) |
| Equipment | |
|
Hitch jack |
|
|
Safety chains |
|
|
Adjustable clevis hitch |
|
|
Brake/turn/tail lights w/black box control |
|
|
Work light |
|
|
SMV Emblem |
|
|
Ball Hitch |
|
| Frame Components | |
|
Design, in. (mm) |
4 x 6 (102 x 152) telescoping horizontal members inside 5 x 7 (127 x 178) fixed center members; 5 x 5 (127 x 127) vertical members; 3 x 5 (76 x 127) raking wheel beams |
|
Transport axles |
Offset walking beam |
|
Transport tires |
Four 9.5L x 15 SL implement tread |
|
Maximum transport speed, mph (k/h) |
20 (32) |
| Raking Components | |
|
Number of raking wheels |
17 raking wheels with standard UV resistant wind panels |
|
Wheel diameter, in. (mm) |
60 (1524) |
|
Raking teeth per wheel |
36 rubber-mounted teeth in sets of 2 |
|
Raking wheel support |
Tapered roller bearings |
| Tractor Requirements | |
|
Hydraulic remotes required |
1 (detent function recommended) |
|
Minimum pressure requirement, psi (bar) |
2000 (138) |
|
Minimum recommended tractor hp (kW) |
65 (49) |
|
Standard 7-pin outlet |
Required |
| Weight, lbs. (kg) | |
|
Shipping |
5960 (2703) |
|
Operating |
5700 (2586) |