Maple Valley Implement Inc Haytools & Spreaders
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
BUILT FOR FAST CUTTING AND QUICK DRYDOWN
Turn standing crop into fast-drying windrows or swaths with amazing speed using one of New Holland's Discbine® disc mower-conditioners. They slice through thick, tangled wet crops and mow through fire ant hills or gopher mounds without missing a beat. The Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through more than 15 feet at a time.
Type |
Flail system with 100 tapered flails and optional textured hood liner |
Length, in. (mm) |
102 (2591) |
Diameter, in. (mm) |
22 (560) |
Drive |
4 HB V-belt |
Speed, rpm |
1000 std. or optional 718 |
Conditioner Adjustment |
Adjustable rotor hood with replaceable smooth liner |
Dimensions | |
Height, Transport, ft. in. (m) |
5' 8" (1.7) |
Height, Operating, ft. in. (m) |
4' 5" (1.3) |
Width, Transport, ft. in. (m) |
11' 3" (3.4) with standard drawbar hitch |
Width, Operating, ft. in. (m) |
16' 0" (4.6) with standard drawbar hitch |
Width, Operating, ft. in. (m) |
|
Width, Operating, ft. in. (m) |
|
Length, Transport, ft. in. (m) |
17' 7" (5.3) with standard drawbar hitch |
Length, Transport, ft. in. (m) |
|
Length, Transport, ft. in. (m) |
|
Length, Operating, ft. in. (m) |
17' 8" (5.4) ) with standard drawbar hitch |
Length, Operating, ft. in. (m) |
|
Length, Operating, ft. in. (m) |
|
Weight, Operating lbs. (kg) |
4,065 (1844) |
Drive | |
|
540 or 1000 rpm PTO, enclosed gears and four HB belt |
Drive Protection | |
|
Slip clutch and over-running clutch |
Hydraulics | |
Hydraulic swing |
Standard (double-acting cylinder) |
Hydraulic lift |
Standard (operated by two single-acting cylinders; master/slave) |
Hydraulic tilt |
Standard (operated by single-acting cylinder and incorporated into the lift system) |
Material Discharge | |
Swath, ft. (mm) |
7 (2134) |
Windrow, ft. (mm) |
Adjustable from 3 to 7 (914 to 2134) |
MowMax™Cutterbar with ShockPRO™Hubs | |
Number of discs |
8 |
Number of knives |
16 (2 per disc) |
Speed, rpm |
3000 |
Cutting width, ft. in. (mm) |
10' 4" (3160) |
Cutting angle |
2 to 10 degrees, hydraulic control |
Cutting height, in. (mm) |
0.95 to 3.2 (24 to 81) with standard skid shoes |
Ground clearance with header fully raised, in. (mm) |
17 (432) |
Flotation |
Vertical and lateral, adjustable springs |
Speeds | |
Operating, mph (kph) |
0 to 9 (0 to 14.5) |
Transport, mph (kph) |
20 (32) |
Tractor Requirement | |
|
80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar. |
|
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
Tubeless Ag Rib Implement Tires | |
Size |
9.5L x 14 6PR |