Maple Valley Implement Inc Haytools & Spreaders
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
RELIABLE, HARD-WORKING BALERS
Operators who custom bale, especially for horse farms, are big fans of New Holland square balers. New Holland bales are the only choice for hand-feeding because they quickly separate into flakes. Professionals put their trust in BC5000 model balers because they make consistently dense, well-shaped bales that are easy to handle.
Cross section |
14x18 in. (36x46 cm) |
Length |
Adjustable, 12 to 52 in. (31 to 132 cm) |
Dimensions: | |
Height (max.) |
71 in. (180 cm) |
Width |
120 in. (304 cm) |
Length with 3-joint PTO and quarter-turn bale chute |
247 in. (626 cm) |
Feed Opening | |
|
247 in. (626 cm) |
Flow-Action Feeding System: | |
Type |
|
Drive |
|
Main Drive: | |
Flywheel diameter |
22 in. (56 cm) |
PTO |
Three-joint |
Protection |
Shearbolt, overrunning and slip clutches |
Gearbox |
Hypoid with tapered roller bearings; heat-treated alloy steel running in oil |
Options | |
|
BC5050: two- or three-joint PTO (Cat. IV); hydraulic pickup lift; hydraulic tongue swing; needle slot baffle kit; auxiliary lights; road light kit; |
|
wagon hitch and bale loading chute; triple-purpose chute; quarter-turn bale chute; hydraformatic bale tension; ball hitch (BC5070, BC5080 only); replaceable bale chamber, |
|
hydraulic doors kit and bale case extension kit (BC5080 only); bale case extension; grass feeder kit; safety chain; two-position hitch; |
Plunger: | |
Stroke length |
30 in. (76.2 cm) |
Speed (540 rpm) |
93 SPM |
Construction |
High-strength steel throughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions |
Recommended Transport Speed | |
|
20 mph (32 km/h) |
Rotary Feeding System: | |
Type |
Packer fork in combination with two paired rotors |
Drive |
Chain from main drive shaft; sealed ball bearings on all shafts |
Super-Sweep Pickup: | |
Width inside |
75 in. (1.9 m) |
Width on flare |
80 in. (2 m) |
Number of teeth |
156 on six tooth bars |
Floating windguard |
Thirteen rods |
Drive |
|
Gauge wheel |
15x6.00x6 |
Tires: | |
Flotation (right) |
27x9.50-15, 6 PR |
(left) |
31x13.50-15, 6PR |
Tractor Requirement* | |
Horsepower (min.) |
75 hp (56 kW) |
|
Tractor weight must be greater than baler weight; excludes bale thrower. |
Tying Mechanisms: | |
Type |
Knotter or twister (heavy-duty) |
Protection |
Shearbolt |
Capacity (twine) |
Eight balls |
(wire) |
Four coils |
Weight (approximate): | |
With three-joint PTO,twine version |
3,715 lb. (1685 kg) |
With three-joint PTO,wire version |
3,851 lb. (1746 kg) |