Maple Valley Implement Inc Haytools & Spreaders
PRINT 
Get a Quote
GET A QUOTE
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
SEND TO A FRIEND
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
RELIABLE, HARD-WORKING BALERS
Operators who custom bale, especially for horse farms, are big fans of New Holland square balers. New Holland bales are the only choice for hand-feeding because they quickly separate into flakes. Professionals put their trust in BC5000 model balers because they make consistently dense, well-shaped bales that are easy to handle.
|
Cross section |
14x18 in. (36x46 cm) |
|
Length |
Adjustable, 12 to 52 in. (31 to 132 cm) |
| Dimensions: | |
|
Height (max.) |
58 in. (146 cm) |
|
Width |
108 in. (275 cm) |
|
Length with 3-joint PTO and quarter-turn bale chute |
240 in. (610 cm) |
| Feed Opening | |
|
|
240 in. (610 cm) |
| Flow-Action Feeding System: | |
|
Type |
Six feeder tines on a moving finger bar |
|
Drive |
Chain; sealed ball bearings |
| Main Drive: | |
|
Flywheel diameter |
22 in. (56 cm) |
|
PTO |
Three-joint |
|
Protection |
Shearbolt, overrunning and slip clutches |
|
Gearbox |
Hypoid with tapered roller bearings; heat-treated alloy steel running in oil |
| Options | |
|
|
BC5050: two- or three-joint PTO (Cat. IV); hydraulic pickup lift; hydraulic tongue swing; needle slot baffle kit; auxiliary lights; road light kit; |
|
|
wagon hitch and bale loading chute; triple-purpose chute; quarter-turn bale chute; hydraformatic bale tension; ball hitch (BC5070, BC5080 only); replaceable bale chamber, |
|
|
hydraulic doors kit and bale case extension kit (BC5080 only); bale case extension; grass feeder kit; safety chain; two-position hitch; |
| Plunger: | |
|
Stroke length |
30 in. (76.2 cm) |
|
Speed (540 rpm) |
79 SPM |
|
Construction |
High-strength steel throughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions |
| Recommended Transport Speed | |
|
|
20 mph (32 km/h) |
| Rotary Feeding System: | |
|
Type |
|
|
Drive |
|
| Super-Sweep Pickup: | |
|
Width inside |
65 in. (1.65 m) |
|
Width on flare |
70 in. (1.8 m) |
|
Number of teeth |
88 on four tooth bars |
|
Floating windguard |
Eight rods |
|
Drive |
V-belt to roller chain to "lost motion" reel drive |
|
Gauge wheel |
3.00x12; semi-pneumatic |
| Tires: | |
|
Flotation (right) |
25x7.50-15, 6PR |
|
(left) |
27x9.50-15, 6PR |
| Tractor Requirement* | |
|
Horsepower (min.) |
35 hp (26 kW) |
|
|
Tractor weight must be greater than baler weight; excludes bale thrower. |
| Tying Mechanisms: | |
|
Type |
Knotter |
|
Protection |
Shearbolt |
|
Capacity (twine) |
Four balls |
|
(wire) |
NA |
| Weight (approximate): | |
|
With three-joint PTO,twine version |
3,085 lb. (1399 kg) |
|
With three-joint PTO,wire version |
NA |