Specifications: Boomer 50 available from Maple Valley Implement, MI
|
50 |
||
| Brakes | ||
|
Service brakes |
Dual-pedal mechanically actuated wet disc | |
|
Parking brake |
Engage hand-lever, foot-assist service brake | |
| Dimensions / Weight | ||
|
Approx shipping length, in (mm) (w/ R4 tires) |
121 (3068) | |
|
Approx shipping width, in (mm) (w/ R4 tires) |
64 (1618) | |
|
Approx shipping hieght, in (mm) (w/ R4 tires) |
93 (2347) | |
|
Approx shipping weight, lbs (kg) (w/ R4 tires) |
3549 (1610) | |
| Electrical | ||
|
Battery capacity (Amp hours / cold cranking amps) |
80/660 | |
|
Lighting |
2 - hi/lo beam halogen headlights, 2 - halogen front-corner work lights, 2 - tail / brake lights, 2 - hazard / turn signals | |
|
Instrumentation |
Analog tachometer, fuel gauge, coolant temperature, hour meter. | |
|
Alternator |
12 volt, 50 amp | |
| Engine | ||
|
Type |
4-cylinder, diesel | |
|
Number of cylinders / Aspiration |
4 / Natural | |
|
Displacement, cu. in. (L) |
153 (2.5) | |
|
Gross engine power, hp (kW) |
47 (35) | |
|
PTO horsepower, hp (kW) - Gear |
39.4 (29.4) | |
|
PTO horsepower, hp (kW) - HST |
37.1 (27.7) | |
|
Rated speed (rpm) |
2600 | |
|
Fuel type |
Standard diesel fuels or B2 Biodiesel (meeting ASTM 6751 standards) | |
|
Air filter |
Dual element, dry type with cleanable outer element and replaceable inner safety element | |
|
Lubrication |
Full flow, pressure feed lubrication with spin-on filter cartridge | |
|
Emissionization standard |
Tier III | |
|
Fuel tank capacity, gal (L) |
9.5 (36) | |
|
Exhaust Type |
Under hood | |
|
Foot Throttle |
Standard | |
|
Cold Start Aid |
Glow Plug | |
| Front Axle | ||
|
FWD Axle |
Standard | |
|
Front differential lock |
Limited slip | |
|
FWD clutch engagement |
Mechanical lever | |
| Hydraulics | ||
|
System type |
Open center, fixed displacement gear pump | |
|
Implement pump capacity, gpm (lpm) |
8.2 (31.2) | |
|
Steering & services system, gpm (lpm) |
Hydrostatic power steering w/dedicated gear pump, Gear = 4.1 (15.6) / HST = 5.5 (20.8) | |
|
Total maximum tractor flow, gpm (lpm) |
Gear = 12.3 (46.8) / HST = 13.7 (52.0) | |
|
Remote valves |
Optional; max of 2 open center, rear mounted, 3 position, self centering. | |
|
Loader control valve |
Standard | |
| Operator Area / General | ||
|
Seat |
Fore / Aft / Weight adjustable with spring suspension | |
|
Operator Floor |
Sound dampening, anti-slip rubber mat | |
|
Steering column |
Tilting | |
|
Cup holder / Tray |
Standard | |
|
Hood design |
One piece, flip-up hood on gas strut | |
|
ROPS |
Foldable | |
| PTO | ||
|
Rear PTO |
Electro-hydraulic engaged, Independent 540-RPM, w/ flip-up PTO shield | |
|
Mid PTO |
Optional - Independent 2000RPM | |
| Rear 3-Point Hitch | ||
|
Category |
Category I | |
|
Position control |
One lever - Mechanical | |
|
Drop rate control |
Standard | |
|
Draft control |
Optional - Top Link sensing | |
|
Drawbar |
2-position swinging / extendable | |
|
OECD lift capacity @ ball ends, lbs (kg) |
2756 (1250) | |
| Rear Axle | ||
|
Rear differential lock |
Mechanical foot pedal engagement | |
| Transmission | ||
|
Traction clutch - Gear transmission |
Dry, 11-inch (275 mm) diameter organic plate | |
|
Type - Gear |
16Fx16R with 4 syncronized gears, 4 constant mesh ranges and synchronized dash-mounted shuttle | |
|
Type - HST |
3 Range, dual-pedal (Fwd/Rev) hydrostatic transmission | |
|
Cruise Control |
Standard on HST |