Specifications: FP240 available from Maple Valley Implement, MI
|
FP240 |
||
| Optional CropPro™ Crop Processor | ||
|
Optional CropPro™ Crop Processor |
 |
|
|
Construction |
Hardened ductile iron, steel shaft | |
|
Weight, lbs. (kg) |
520 lbs (231kg) | |
|
Roll width, in. (mm) |
26-7/8" (682.6 mm) | |
|
Roll diameter, in. (mm) |
7-7/8" (200 mm) | |
|
Roll gap, in. (mm) |
3/16" to 5/8" (4.8 to 15.9 mm) | |
|
Roll speed |
2650 rpm upper, 2250 rpm lower | |
| Specifications | ||
|
Weight (single axle), lbs. (kg) |
4700 (2130) | |
|
Length, ft. in. (m) |
21' 6" (6.5 m) | |
|
Height with standard spout, ft. in. (m) |
11' 2" (3.4 m) | |
|
Width, ft. in. (m) |
10' 8" (3.3 m) | |
|
Number/type of knives |
12 single-edge hardened alloy | |
|
Cutterhead, type/speed |
Cylinder, 850 rpm | |
|
Cutterhead, diameter, in. (mm) |
21" (533.4 mm) | |
|
Throat opening, in. (mm) |
24-3/8" x 6-5/8" (619.76 mm x 167.6 mm) | |
|
Shearbar |
Quick adjust, reversible, hard-faced on vertical and horizontal surfaces | |
|
Length of cut, in. (mm) |
3/16" to 7/16" (76.2 to 177.8 mm) | |
|
Blower speed |
1000 rpm | |
|
Recommended max. tractor hp |
300 hp | |
|
Minimum power required |
180 PTO hp | |
|
Knife sharpener |
3" manual, built-in | |
|
Recutter screens (non processor units) |
6 sizes available | |
|
Vertical wheel adjustment, in. (mm) |
6" (152 mm) | |
|
Tire sizes, single axle |
14Lx16.1 8PR standard | |
|
Tire sizes, tandem axle |
11Lx15-15 6PR |
